{"id":30555,"date":"2026-10-18T05:35:56","date_gmt":"2026-10-18T05:35:56","guid":{"rendered":"https:\/\/stocksanaat.com\/en\/antifouling-paint\/"},"modified":"2026-11-04T07:23:31","modified_gmt":"2026-11-04T07:23:31","slug":"antifouling-paint","status":"publish","type":"post","link":"https:\/\/stocksanaat.com\/en\/antifouling-paint\/","title":{"rendered":"Antifouling Paint: How It Works and How to Choose the Right One"},"content":{"rendered":"\r\n<p class=\"wp-block-paragraph\">Marine growth builds up fast on a hull. Barnacles, algae and slime add roughness, drag and extra fuel use. <strong>Antifouling paint<\/strong> is the coating that stops this from happening.<\/p>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">This guide explains how it works, the main types, and how to choose the right one for your vessel. It is written for shipyards, boat builders, contractors and industrial buyers.<\/p>\r\n\r\n\r\n\r\n<div id=\"rank-math-toc\" class=\"wp-block-rank-math-toc-block\">\r\n<h2>Table of Contents<\/h2>\r\n<nav>\r\n<ul>\r\n<li><a href=\"#what-is-antifouling-paint\">What Is Antifouling Paint?<\/a><\/li>\r\n<li><a href=\"#how-does-antifouling-work\">How Does Antifouling Work?<\/a><\/li>\r\n<li><a href=\"#types-of-antifouling-biocidal-vs-foul-release-coatings\">Types of Antifouling: Biocidal vs Foul-Release Coatings<\/a><\/li>\r\n<li><a href=\"#antifouling-paint-for-ships\">Antifouling Paint for Ships<\/a><\/li>\r\n<li><a href=\"#does-antifouling-paint-work\">Does Antifouling Paint Work?<\/a><\/li>\r\n<li><a href=\"#how-to-choose-the-right-coating\">How to Choose the Right Coating<\/a><\/li>\r\n<li><a href=\"#how-to-apply-the-coating-correctly\">How to Apply the Coating Correctly<\/a><\/li>\r\n<li><a href=\"#common-mistakes-to-avoid\">Common Mistakes to Avoid<\/a><\/li>\r\n<li><a href=\"#where-to-find-bajak-marine-coatings\">Where to Find Bajak Marine Coatings<\/a><\/li>\r\n<li><a href=\"#frequently-asked-questions\">Frequently Asked Questions<\/a><\/li>\r\n<li><a href=\"#conclusion-match-the-coating-to-the-vessel\">Conclusion: Match the Coating to the Vessel<\/a><\/li>\r\n<\/ul>\r\n<\/nav><\/div>\r\n\r\n\r\n\r\n<h2 id=\"what-is-antifouling-paint\" class=\"wp-block-heading\">What Is Antifouling Paint?<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Antifouling paint is a specialist coating for the part of a hull that stays under water. Its job is to stop marine organisms from attaching and growing. This unwanted growth is called fouling, and it starts within days of immersion on an unprotected surface.<\/p>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">People search for it in many ways: what is antifouling paint, bottom paint, hull paint or anti-fouling coating. They all describe the same family of products. For a deeper technical background, see this overview of <a href=\"https:\/\/en.wikipedia.org\/wiki\/Anti-fouling_paint\" target=\"_blank\" rel=\"noopener dofollow\">anti-fouling paint<\/a>.<\/p>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">It does not protect steel from rust. That is the job of the primer and epoxy layers below it. Our guide on <a href=\"https:\/\/stocksanaat.com\/en\/antifouling-vs-anticorrosive-paint\/\">antifouling vs anticorrosive paint<\/a> explains the difference clearly.<\/p>\r\n\r\n\r\n\r\n<h2 id=\"how-does-antifouling-work\" class=\"wp-block-heading\">How Does Antifouling Work?<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">There are two main ways it works. The first is chemical. The second is physical.<\/p>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li><strong>Chemical action:<\/strong> the film releases active ingredients, called biocides, slowly into the thin layer of water next to the hull. Organisms cannot settle in that layer.<\/li>\r\n<li><strong>Physical action:<\/strong> the film is extremely smooth and low in friction. Growth cannot grip it firmly, so movement or light cleaning removes it.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Which method suits you depends on how the vessel is used. That is the key point of the whole selection process.<\/p>\r\n\r\n\r\n\r\n<figure class=\"wp-block-image aligncenter size-large is-resized\"><img decoding=\"async\" width=\"600\" height=\"411\" class=\"wp-image-30553 aligncenter\" style=\"width: 600px;\" src=\"https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/antifouling-paint-fouled-sailboat-hull-dry-dock-unsplash-ETh9DEcLT_g.webp\" alt=\"Sailboat hull in dry dock before antifouling paint is applied\" srcset=\"https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/antifouling-paint-fouled-sailboat-hull-dry-dock-unsplash-ETh9DEcLT_g.webp 950w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/antifouling-paint-fouled-sailboat-hull-dry-dock-unsplash-ETh9DEcLT_g-400x274.webp 400w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/antifouling-paint-fouled-sailboat-hull-dry-dock-unsplash-ETh9DEcLT_g-768x525.webp 768w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/antifouling-paint-fouled-sailboat-hull-dry-dock-unsplash-ETh9DEcLT_g-430x294.webp 430w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/antifouling-paint-fouled-sailboat-hull-dry-dock-unsplash-ETh9DEcLT_g-700x479.webp 700w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/antifouling-paint-fouled-sailboat-hull-dry-dock-unsplash-ETh9DEcLT_g-150x103.webp 150w\" sizes=\"(max-width: 600px) 100vw, 600px\" \/><\/figure>\r\n\r\n\r\n\r\n<h2 id=\"types-of-antifouling-biocidal-vs-foul-release-coatings\" class=\"wp-block-heading\">Types of Antifouling: Biocidal vs Foul-Release Coatings<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Most products fall into two groups. Biocidal paints are the traditional choice. Foul-release paints are the newer, biocide-free option. Each group has its own strengths and limits.<\/p>\r\n\r\n\r\n\r\n<h3 id=\"biocidal-antifouling\" class=\"wp-block-heading\">Biocidal Antifouling<\/h3>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Biocidal products work by releasing active ingredients. They come in two common forms: ablative and self-polishing antifouling.<\/p>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li><strong>Ablative (soft) coatings:<\/strong> the paint wears away gradually as the vessel moves and when it is wiped or scrubbed. A fresh layer is exposed each time.<\/li>\r\n<li><strong>Self-polishing antifouling:<\/strong> the film dissolves smoothly in moving water in a controlled way. It keeps the biocide release steady and leaves a smoother surface over time.<\/li>\r\n<li><strong>Hard (contact leaching) coatings:<\/strong> the film stays in place while the biocide leaches out. They suit fast boats and can be cleaned more often.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<h3 id=\"foul-release-coatings\" class=\"wp-block-heading\">Foul-Release Coatings<\/h3>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Foul-release coatings rely on a slick, low-surface-energy film, often silicone-based. Growth that settles is released by the flow of water when the vessel moves, or removed by gentle cleaning. They do not depend on biocide release.<\/p>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">They need careful application and a compatible tie coat. A damaged film is also harder to touch up than a conventional product, so check the manufacturer&#8217;s repair guidance.<\/p>\r\n\r\n\r\n\r\n<figure class=\"wp-block-table\">\r\n<table>\r\n<thead>\r\n<tr>\r\n<th>Feature<\/th>\r\n<th>Biocidal (ablative \/ self-polishing)<\/th>\r\n<th>Foul-release<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr>\r\n<td>How it works<\/td>\r\n<td>Releases biocide to stop settlement<\/td>\r\n<td>Slippery surface; growth cannot grip<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Best for<\/td>\r\n<td>Mixed or moderate activity, many hull types<\/td>\r\n<td>Fast, active vessels with regular sailing<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Idle periods<\/td>\r\n<td>Needs release to continue working<\/td>\r\n<td>Less effective when the vessel sits still<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Repairs<\/td>\r\n<td>Usually simpler to touch up<\/td>\r\n<td>Needs the manufacturer&#8217;s repair system<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/figure>\r\n\r\n\r\n\r\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\">\r\n<p>Always read the data sheet before you decide. The same coating can perform very differently on a fast vessel and on a slow one.<\/p>\r\n<\/blockquote>\r\n\r\n\r\n\r\n<h2 id=\"antifouling-paint-for-ships\" class=\"wp-block-heading\">Antifouling Paint for Ships<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Ships face very different conditions from small boats. They are large, they cover great distances and they spend long periods in port. Antifouling paint for ships must handle all three.<\/p>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Large hulls need a coating that stays smooth for a long dry-docking cycle. A rough hull increases drag and fuel use, so the choice of coating has a direct cost effect. For the wider hull plan, see how a <a href=\"https:\/\/stocksanaat.com\/en\/marine-coating-system\/\">marine coating system<\/a> works together with the primer and topcoat.<\/p>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Regulations also matter. International rules, including the IMO anti-fouling convention, restrict harmful substances in these coatings. Always confirm that your product and active ingredients meet the rules for your trading area and flag.<\/p>\r\n\r\n\r\n\r\n<h2 id=\"does-antifouling-paint-work\" class=\"wp-block-heading\">Does Antifouling Paint Work?<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Yes, when it is the right type, applied correctly, on a properly prepared hull. The common complaint that antifouling paint does not work usually has a simple cause.<\/p>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li><strong>Wrong type for the vessel:<\/strong> a self-polishing coating on a vessel that rarely moves will not polish.<\/li>\r\n<li><strong>Poor preparation:<\/strong> loose old paint, dirt or oil stops the new coat from bonding.<\/li>\r\n<li><strong>Too little film:<\/strong> a thin coat wears away before the planned service life.<\/li>\r\n<li><strong>Long idle periods:<\/strong> growth settles when there is no flow and no release.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">No coating stays clean forever. It slows fouling and keeps it manageable. Plan inspections and hull cleaning as part of the maintenance routine.<\/p>\r\n\r\n\r\n\r\n<div class=\"sso-cta\"><div class=\"sso-cta__body\"><span class=\"sso-cta__eyebrow\">Antifouling paint<\/span><p class=\"sso-cta__title\">Protect your hull from marine fouling.<\/p><p class=\"sso-cta__text\">See the Bajak antifouling paint supplied by Stock Sanat Caspian, or send us your vessel details for a recommendation.<\/p><\/div><div class=\"sso-cta__actions\"><a class=\"sso-cta__btn\" href=\"https:\/\/stocksanaat.com\/en\/product\/bajak-antifouling-paint\/\">See Antifouling Paint<\/a><a class=\"sso-cta__link\" href=\"https:\/\/stocksanaat.com\/en\/contact-us\/\">Request a Quote<\/a><\/div><\/div>\r\n\r\n\r\n\r\n<h2 id=\"how-to-choose-the-right-coating\" class=\"wp-block-heading\">How to Choose the Right Coating<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Choosing the right coating comes down to three practical questions. Answer them before you compare products.<\/p>\r\n\r\n\r\n\r\n<h3 id=\"1-vessel-speed\" class=\"wp-block-heading\">1. Vessel Speed<\/h3>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Fast vessels create water flow that polishes ablative and self-polishing films, and that helps release foul-release coatings. Slow vessels benefit less from flow, so they usually need a coating that does not depend on it.<\/p>\r\n\r\n\r\n\r\n<h3 id=\"2-vessel-activity\" class=\"wp-block-heading\">2. Vessel Activity<\/h3>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">A vessel that sails often behaves differently from one that sits in port for weeks. Frequent sailing suits both self-polishing and foul-release types. Long idle periods put more demand on the biocide release of the film.<\/p>\r\n\r\n\r\n\r\n<h3 id=\"3-water-temperature-and-region\" class=\"wp-block-heading\">3. Water Temperature and Region<\/h3>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Warm water speeds up growth. In warm waters, fouling pressure is usually higher, so the coating needs strong performance. Cold water slows growth and often allows a lighter system. Always follow the data sheet for the region.<\/p>\r\n\r\n\r\n\r\n<figure class=\"wp-block-table\">\r\n<table>\r\n<thead>\r\n<tr>\r\n<th>Vessel profile<\/th>\r\n<th>Typical direction<\/th>\r\n<th>Why<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr>\r\n<td>Fast, active, regular sailing<\/td>\r\n<td>Self-polishing or foul-release<\/td>\r\n<td>Water flow polishes or releases growth<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Slow or often idle<\/td>\r\n<td>Ablative or hard biocidal coating<\/td>\r\n<td>Does not rely on high speed<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Warm, high-fouling waters<\/td>\r\n<td>Higher-performance biocidal system<\/td>\r\n<td>Growth pressure is higher<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Cold waters, moderate use<\/td>\r\n<td>Lighter biocidal or foul-release<\/td>\r\n<td>Slower growth, less demand<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/figure>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Also check the primer and previous coating. A new coat must be compatible with what is already on the hull. Match the antifouling paint to the vessel, not the other way round. If in doubt, ask the manufacturer for a written system recommendation.<\/p>\r\n\r\n\r\n\r\n<figure class=\"wp-block-image aligncenter size-large is-resized\"><img decoding=\"async\" width=\"600\" height=\"411\" class=\"wp-image-30554 aligncenter\" style=\"width: 600px;\" src=\"https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/hull-waterline-red-bottom-paint-ship-unsplash-SInhLTQouEk.webp\" alt=\"Ship hull with red antifouling paint below the waterline\" srcset=\"https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/hull-waterline-red-bottom-paint-ship-unsplash-SInhLTQouEk.webp 950w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/hull-waterline-red-bottom-paint-ship-unsplash-SInhLTQouEk-400x274.webp 400w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/hull-waterline-red-bottom-paint-ship-unsplash-SInhLTQouEk-768x525.webp 768w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/hull-waterline-red-bottom-paint-ship-unsplash-SInhLTQouEk-430x294.webp 430w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/hull-waterline-red-bottom-paint-ship-unsplash-SInhLTQouEk-700x479.webp 700w, https:\/\/stocksanaat.com\/en\/wp-content\/uploads\/2026\/10\/hull-waterline-red-bottom-paint-ship-unsplash-SInhLTQouEk-150x103.webp 150w\" sizes=\"(max-width: 600px) 100vw, 600px\" \/><\/figure>\r\n\r\n\r\n\r\n<h2 id=\"how-to-apply-the-coating-correctly\" class=\"wp-block-heading\">How to Apply the Coating Correctly<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">A good result depends on the order of work. Follow these steps when you apply it:<\/p>\r\n\r\n\r\n\r\n<ol class=\"wp-block-list\">\r\n<li><strong>Clean the hull.<\/strong> Remove growth, dirt, oil and salt.<\/li>\r\n<li><strong>Repair the old coating.<\/strong> Sand and fix damaged areas.<\/li>\r\n<li><strong>Apply the corrosion system.<\/strong> Use a compatible primer or epoxy on bare steel.<\/li>\r\n<li><strong>Check the weather.<\/strong> Surface must be dry and above the dew point.<\/li>\r\n<li><strong>Stir and apply the paint.<\/strong> Use the thickness and number of coats the data sheet specifies.<\/li>\r\n<li><strong>Watch the recoat window.<\/strong> Apply the next coat within the stated times.<\/li>\r\n<li><strong>Allow it to cure before launch.<\/strong> Follow the immersion interval given by the manufacturer.<\/li>\r\n<\/ol>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Plan the timing with your dry-dock schedule. Our notes on <a href=\"https:\/\/stocksanaat.com\/en\/how-often-to-repaint-a-ship-hull\/\">how often to repaint a ship hull<\/a> can help you set it.<\/p>\r\n\r\n\r\n\r\n<h2 id=\"common-mistakes-to-avoid\" class=\"wp-block-heading\">Common Mistakes to Avoid<\/h2>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li>Choosing by price alone instead of by vessel profile.<\/li>\r\n<li>Painting over poorly prepared or incompatible old coatings.<\/li>\r\n<li>Ignoring the minimum and maximum recoat intervals.<\/li>\r\n<li>Applying too thin a film to save paint.<\/li>\r\n<li>Mixing brands in one system without checking compatibility.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Most of these mistakes with antifouling paint can be avoided with a clear plan and the manufacturer&#8217;s data sheet. A little extra time in preparation saves a lot of cost later.<\/p>\r\n\r\n\r\n\r\n<h2 id=\"where-to-find-bajak-marine-coatings\" class=\"wp-block-heading\">Where to Find Bajak Marine Coatings<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Stock Sanaat supplies Bajak marine coatings for industrial and marine buyers. <a href=\"https:\/\/stocksanaat.com\/en\/product\/bajak-antifouling-paint\/\">Bajak Antifouling Paint<\/a> is designed to prevent algae, barnacles and other marine growth on ship hulls, docks and submerged structures.<\/p>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">You can also compare related products in the <a href=\"https:\/\/stocksanaat.com\/en\/product-category\/marine-paint\/\">marine paint category<\/a>. Ask for the data sheet and a system recommendation for your vessel before you order.<\/p>\r\n\r\n\r\n\r\n<h2 id=\"frequently-asked-questions\" class=\"wp-block-heading\">Frequently Asked Questions<\/h2>\r\n\r\n\r\n<div id=\"rank-math-faq\" class=\"rank-math-block\">\n<div class=\"rank-math-list \">\n<div id=\"faq-question-1\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">What is antifouling paint?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>Antifouling paint is a coating applied below the waterline. It stops barnacles, algae, weed and other marine organisms from settling on the hull. It either releases a biocide slowly or gives a slippery surface that growth cannot grip. Both approaches keep the hull smooth and reduce drag.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-2\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">Does antifouling paint work on every vessel?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>It works when the type matches the vessel and the water. A slow, idle boat in warm water needs a different coating from a fast ship in cold water. Poor preparation or the wrong choice is the usual reason for failure. Always match the paint to speed, activity and temperature.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-3\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">What is self-polishing antifouling?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>Self-polishing antifouling slowly wears away in moving water. As each thin layer dissolves, a fresh layer of biocide is exposed. This keeps the release rate steady and the hull smooth. It performs best on vessels that sail regularly, because it needs water flow to polish.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-4\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">What is the difference between biocidal and foul-release coatings?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>Biocidal coatings use active ingredients to stop growth from settling. Foul-release coatings use a very smooth, low-friction surface, so growth cannot bond firmly and is washed off by speed or light cleaning. Foul-release products are usually biocide-free, but they are more sensitive to damage and application quality.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-5\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">Can I apply antifouling paint directly on bare steel?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>No. Bare steel needs a corrosion-protective primer or epoxy system first. It is a surface layer, not a rust barrier. Apply it over a compatible primer within the recoat window given on the data sheet so it bonds properly and the whole system lasts.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-6\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">How often should antifouling be renewed?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>There is no single interval. Service life depends on the product, film thickness, speed, trading pattern and water conditions. Many owners plan renewal around each dry-docking. Check the data sheet for the expected life, and inspect the hull for wear and growth between dockings.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-7\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">Is antifouling paint the same as anticorrosive paint?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>No. Anticorrosive paint protects the steel from rust and sits under the antifouling coat. The antifouling coat stays on the outside and stops marine growth. A hull below the waterline normally needs both, applied in the right order and compatible with each other.<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\r\n\r\n\r\n<h2 id=\"conclusion-match-the-coating-to-the-vessel\" class=\"wp-block-heading\">Conclusion: Match the Coating to the Vessel<\/h2>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">The best antifouling paint is the one that matches your vessel&#8217;s speed, activity and water temperature, and is applied on a clean, well-primed hull. Biocidal and foul-release coatings both work when used in the right conditions.<\/p>\r\n\r\n\r\n\r\n<p class=\"wp-block-paragraph\">Need help choosing? Request the data sheet for <a href=\"https:\/\/stocksanaat.com\/en\/product\/bajak-antifouling-paint\/\">Bajak Antifouling Paint<\/a>, or <a href=\"https:\/\/stocksanaat.com\/en\/contact-us\/\">contact the Stock Sanaat team<\/a> with your vessel type and trading area. We will help you match the right coating.<\/p>\r\n\r\n<p>&nbsp;<\/p>","protected":false},"excerpt":{"rendered":"<p>Marine growth builds up fast on a hull. Barnacles, algae and slime add roughness, drag and extra fuel use. Antifouling<\/p>\n","protected":false},"author":1,"featured_media":30552,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[87],"tags":[],"class_list":["post-30555","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-educational"],"_links":{"self":[{"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/posts\/30555","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/comments?post=30555"}],"version-history":[{"count":5,"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/posts\/30555\/revisions"}],"predecessor-version":[{"id":30791,"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/posts\/30555\/revisions\/30791"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/media\/30552"}],"wp:attachment":[{"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/media?parent=30555"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/categories?post=30555"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/stocksanaat.com\/en\/wp-json\/wp\/v2\/tags?post=30555"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}