Bajak Coal Tar Epoxy Coating for Steel and Concrete

  • Two-component coal tar epoxy for steel and concrete
  • Semi-gloss black (RAL 9005), 125 micron recommended DFT
  • Theoretical coverage 5.6 m²/L, touch-dry in 7 to 8 hours at 20 °C
  • Resists seawater, moisture, oils and chemicals; 20 L pack

Need advice or a price? Request a quote from our technical team.

Bajak Coal Tar Epoxy is a two-component, semi-gloss black protective coating for steel and concrete in wet, salty and chemically aggressive service. It builds a tough, water-resistant film for tanks, pipelines and marine structures. Stock Sanat Caspian supplies it in 20-litre packs with technical support.

Bajak Coal Tar Epoxy Coating: Key Features

  • Two-component coal tar epoxy film that resists corrosion, water and seawater
  • Strong adhesion to properly prepared steel and concrete
  • Good resistance to oils, solvents and industrial chemicals
  • Tough, abrasion-resistant semi-gloss black finish (RAL 9005)
  • Suited to industrial plants, buried steel and marine equipment

Because it is a heavy-duty coating, it is usually chosen where a thin decorative paint would fail early. Check the technical data sheet for the recommended system before you order.

Coal Tar Epoxy Technical Specifications

The table lists the data confirmed for this product. Ask us for the technical data sheet if you need mixing, thinning or recoat details for your project.

Property Value
Product Bajak Coal Tar Epoxy Coating
Type Two-component epoxy / coal tar protective coating
Colour Black (RAL 9005)
Finish Semi-gloss
Recommended dry film thickness (DFT) 125 microns
Theoretical coverage 5.6 m²/L at 125 microns
Touch-dry time 7 to 8 hours at 20 °C
Pack size 20 litres
Suitable surfaces Prepared steel and concrete

At 125 microns, one 20-litre pack covers about 112 m² in theory. Real coverage is lower because of surface roughness, application losses and wastage.

Where to Use Coal Tar Epoxy

This coal tar epoxy is designed for surfaces that stay wet, buried or exposed to chemicals. Typical uses include:

  • Storage tanks, including crude oil and water tanks
  • Water transmission pipelines and buried steel pipes
  • Concrete and steel foundations
  • Industrial plants and treatment facilities
  • Marine equipment such as chains, anchors and structures in contact with seawater

For coastal steelwork, see our wider range of marine paints.

How to Apply Bajak Coal Tar Epoxy

Follow the technical data sheet for exact values. The general sequence is:

  1. Prepare the surface. Remove rust, oil, grease, salts and loose material. Steel should be blast-cleaned, and concrete should be sound, clean and dry.
  2. Mix both components. Combine base and hardener as the manufacturer instructs and stir until the mixture is uniform.
  3. Apply the coat. Use brush, roller or airless spray to reach the recommended film thickness of 125 microns, and check it with a gauge.
  4. Let it dry. The film is touch-dry in 7 to 8 hours at 20 °C. Keep it clean and dry until it has cured.

Use this coating as part of a full system. Bajak 65% zinc-rich epoxy is a common primer choice on steel. For lighter-duty marine and industrial service, compare the epoxy polyamide coating or the epoxy mastic coating.

Safety, Storage and Shelf Life

Wear gloves, safety glasses and protective clothing. Work with good ventilation, and keep the product away from heat, sparks and open flames. Keep it out of reach of children.

Store the sealed pack in a cool, dry place away from heat. Read the label and the data sheet for the exact shelf life of your batch.

Why Buy Coal Tar Epoxy from Stock Sanat Caspian

Stock Sanat Caspian has been the exclusive Bajak representative since 2020. We supply the original product, not a substitute, so the data you receive matches the coating you apply.

  • Original Bajak product: supplied through the exclusive representative.
  • Technical consultation: we help you match the coating to your surface and exposure.
  • Clear specifications: thickness, coverage and drying data are stated openly.

Need a Quote for Coal Tar Epoxy?

Tell us your surface, area and project location. Our team will confirm the system and send you a price. Request a quote or technical advice.

Coal Tar Epoxy FAQ

What is Bajak Coal Tar Epoxy used for?

It protects steel and concrete in wet or buried service, such as tanks, pipelines, foundations and marine equipment exposed to seawater and chemicals.

What colour and finish does it have?

Bajak Coal Tar Epoxy is a semi-gloss black coating, RAL 9005. It is supplied as a two-component product.

What dry film thickness is recommended?

The recommended DFT is 125 microns. Measure the film with a gauge during application to be sure you reach it.

How much area does a 20-litre pack cover?

Theoretical coverage is 5.6 m²/L at 125 microns, about 112 m² per pack. Practical coverage is lower because of losses.

How long does it take to dry?

The film is touch-dry in 7 to 8 hours at 20 °C. Full cure and recoat times depend on conditions, so check the data sheet.

Can I apply it with a brush, roller or airless?

Yes, you can apply it by brush, roller or airless spray. Build the coat evenly to the specified thickness.

How do I get a price?

Contact Stock Sanat Caspian with your area and project details. We will send a quotation and advise on the full coating system.

ColorBlack
FinishSemi-gloss
Theoretical Coverage5.6 m2/L at 125 microns
Touch-Dry Time7-8 hours at 20 C
Pack Size20 litres
ComponentsTwo-component

Reviews

There are no reviews yet.

Be the first to review “Bajak Coal Tar Epoxy Coating for Steel and Concrete”

Your email address will not be published. Required fields are marked *

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.