Polyurethane coating is the finishing layer that decides how a steel structure looks and how well its paint system survives sun, weather, washing and abrasion. Stock Sanat Caspian supplies polyurethane paint in Iran for industrial and marine steel: the Bajak Polyurethane Topcoat (Bajathane), a two-component topcoat sold with its own hardener, directly from the exclusive Bajak representative in Iran.
This page explains what polyurethane coatings are, where they fit in a coating system, what to check before you buy and which factors move the price, so you can send a complete enquiry instead of guessing.
Polyurethane Coating in Iran
A polyurethane coating forms a hard, smooth film by a chemical reaction between a resin base and a hardener (isocyanate). Because the film is tough and easy to keep clean, it is normally used as the last coat over a primer or an epoxy undercoat, never as a stand-alone coat on bare steel.
The polyurethane protective coating we stock is made by Bajak, a paint manufacturer established in 1987. Stock Sanat Caspian has been its exclusive representative in Iran since 2020, so you buy an original product with a traceable supply chain and technical support from the same team. You can read more on our about page and the Bajak brand page.
Buy Polyurethane Paint in Iran
If you want to buy polyurethane paint in Iran for a project, start from the system, not from the pail. A polyurethane topcoat only performs when the layers below it are right. A typical industrial or marine steel system looks like this:
- Surface preparation: clean, dry, free of oil and loose rust. See our guide to marine paint surface preparation.
- Primer: chosen for the substrate and corrosion risk. Browse our primers.
- Intermediate or build coat: usually an epoxy from our epoxy coatings range, with a tie coat where the system requires one.
- Polyurethane topcoat: the finish layer that gives a uniform, easy-to-clean surface.
The full logic of how these layers work together is explained in the marine coating system guide.
Polyurethane Paint for Sale
The polyurethane paint for sale in this category is the Bajak Polyurethane Topcoat:
| Item | Detail |
|---|---|
| Resin type | Polyurethane, two-component |
| Supplied as | Topcoat base with a separate Bajathane hardener, in metal pails |
| Layer in the system | Finish (top) coat over a primed or epoxy-coated surface |
| Typical substrates | Industrial steel, marine steel above the waterline, pipes, machinery and metal fabrications |
| Colors, DFT, drying and recoat times, mixing ratio, thinner, pack sizes | Confirmed in the technical data sheet; ask our team for the sheet that matches your project |
We do not publish figures that are not on the manufacturer's data sheet. If your specification needs a particular film thickness, color or recoat window, tell us and we will send the matching data sheet before you order.
Types and Applications of Polyurethane Coatings
Polyurethane coatings are not all the same. In general, buyers meet these groups:
- Two-component topcoats: base plus hardener, mixed on site. This is the usual choice for industrial and marine steel finishing, and the type we supply.
- Aliphatic and aromatic grades: aliphatic resins are generally chosen where color and gloss must stay stable outdoors; aromatic grades are more typical for interior or undercoat roles. Always confirm the grade on the data sheet.
- Single-component systems: simpler to apply, but they are a different product class with different performance limits.
Common uses for an industrial polyurethane coating include:
- Steel structures, tanks and process equipment
- Marine steel above the waterline, such as decks and superstructure (see our ship and vessel coatings)
- Pipes, machinery and metal fabrications
- Repainting jobs where the final coat must stay clean and uniform
For hull areas below the waterline, polyurethane is not the answer; look at our marine paint range instead.
Polyurethane vs Other Topcoats
| Topcoat | Best for | Main consideration |
|---|---|---|
| Polyurethane | Hard, smooth finish over primer or epoxy on steel | Two components must be mixed correctly and used within pot life |
| Acrylic | Simpler, single-pack finishing jobs | See the Bajak Acrylic Topcoat and our acrylic vs polyurethane topcoat comparison |
| Alkyd | General protective painting at lower system cost | Browse our alkyd paints |
Polyurethane Coating Price: What Affects It
We do not quote a fixed polyurethane paint price on this page because it changes with raw materials, currency and order size. These are the factors that decide the final price:
- Quantity and pack size (pail count, base plus hardener sets)
- Color and finish required
- Film thickness and the area to be coated, which set how many liters you need
- Delivery location and timing
- Whether you also buy the primer and intermediate coats from the same supplier
To get an accurate figure, send the area, the number of coats and the delivery location through our contact page.
Polyurethane Paint Supplier and Stockist in Iran
As a polyurethane paint supplier in Iran, Stock Sanat Caspian offers:
- Original Bajak products through the exclusive representative
- Help matching the topcoat to your primer and intermediate coats
- Technical data sheets on request
- Project quotations for industrial and marine buyers
Our offices and distribution locations are listed on the contact page. Planning a project near Bandar Abbas or another port? Send us the location and quantity and our team will confirm delivery options.
Before You Buy: Quick Checklist
- Is the surface prepared and is the primer within its recoat window?
- Is the polyurethane compatible with the undercoat? Ask for confirmation, do not assume.
- Have you calculated the liters from the area and film thickness on the data sheet?
- Can you mix only what you can apply within the pot life?
- Will the surface stay clean and dry while the film cures? See marine paint cure time.
For general background on the chemistry, see the polyurethane overview on Wikipedia.
Request a Polyurethane Coating Quote
Tell us what you are painting, the area, and where it will be delivered. We will reply with the right data sheet and a quotation. Request a quote or technical advice, or view all products in the shop.
Frequently Asked Questions About Polyurethane Coating
What is polyurethane coating used for?
It is used as the final coat on industrial and marine steel, pipes, tanks and machinery to give a hard, smooth, easy-to-clean protective finish over the primer and undercoats.
Where can I buy polyurethane paint in Iran?
You can buy the Bajak Polyurethane Topcoat from Stock Sanat Caspian, the exclusive Bajak representative in Iran. Contact us with your project details for a quotation.
Can polyurethane paint be applied directly on bare steel?
Normally no. It is a finish coat applied over a suitable primer or epoxy undercoat. Follow the system recommended on the data sheet.
Is polyurethane the same as acrylic or alkyd topcoat?
No. Each resin type has different application and durability characteristics. Our acrylic vs polyurethane topcoat article explains the difference.
How much does polyurethane coating cost?
The price depends on quantity, color, delivery location and the liters needed for your area. Send us the details and we will quote.
Do you supply polyurethane coating to Bandar Abbas?
Send us the delivery location and quantity through the contact page and our team will confirm the options for your site.