
Iranian coating manufacturer, in marine coatings since 1992. Stock Sanat is its exclusive representative since 2020.
Marine Paint Supplier in Iran
Stock Sanat supplies marine paint in Iran for ship hulls, decks, tanks, ports and offshore steel. Our range is built on Bajak, an Iranian manufacturer producing marine and protective coatings since 1992, so epoxy primers, antifouling, mastic and polyurethane topcoats come from one source.
Tell us the vessel or structure, the substrate and the exposure zone. We match them to a Bajak coating system and quote the coats you actually need, with film thickness, pack size and drying data from the product sheet.
Prefer to talk? Call 0912 042 5011
From the Bajak Plant to Your Shipyard
A marine paint supplier is only as dependable as the manufacturer behind it. This is the chain behind the products we sell.
Bajak Paint Established
Bajak begins work on industrial and protective coating technologies in Iran.
Marine Production Starts
Protective and marine coating manufacturing begins in Kaveh Industrial City.
Exclusive Agreement
Stock Sanat signs the exclusive distribution agreement with Bajak Paints.
Marine Range in Stock Sanat
Epoxy, antifouling, mastic and polyurethane coatings supplied with technical advice.
Marine Coatings We Supply in Iran
Six Bajak products cover the usual marine paint system on steel: primer, build coat, antifouling, topcoat and heavy-duty protection for immersed steel.
Bajak Epoxy Polyamide Coating
Two-component epoxy for marine and industrial steel. Resists seawater, engine oil and fuel; 100 micron DFT, 20 L pack.
View Product 02Bajak Antifouling Paint
Single-component, tin-free hull coating with copper oxide and organic biocides. 100 micron DFT, touch-dry in 4 to 5 hours at 20 °C.
View Product 03Bajak 65% Zinc Rich Epoxy Primer
Polyamide epoxy primer with 65% zinc for sacrificial protection of steel. 40 micron DFT, touch-dry in 2 hours at 20 °C.
View Product 04Bajak Epoxy Mastic Coating
High-solid polyamide epoxy that dries at low temperatures. First, intermediate or final coat at 200 micron.
View Product 05Bajak Polyurethane Topcoat (Bajathane)
Finishing coat for epoxy systems where gloss, colour and outdoor resistance matter on topsides and decks.
View Product 06Bajak Coal Tar Epoxy
Black coal tar epoxy for steel and concrete exposed to seawater, moisture, oils and chemicals. 125 micron DFT.
View ProductNeed Marine Paint for a Vessel or Project?
Send the surface, area and operating environment. Stock Sanat will propose a Bajak coating system and a quote before you commit to an order.
How a Marine Paint System Is Built
Marine paint is not one product. A ship hull needs a stack of coats that bond to each other and to blasted steel. A good supplier quotes the whole stack, because a wrong topcoat or a missing primer costs more than the paint saved.
Primer on Prepared Steel
Zinc-rich epoxy primer goes onto blasted steel to give sacrificial corrosion protection from the first coat.
Epoxy Build Coats
Epoxy polyamide or epoxy mastic adds film thickness and a barrier against seawater, oil and fuel.
Antifouling Below the Waterline
Tin-free antifouling releases biocide gradually to keep algae and barnacles off the hull.
Polyurethane Finish Above Water
A polyurethane topcoat protects the epoxy and gives topsides and decks their colour and gloss.
Which Marine Paint Goes Where
Final system, number of coats and recoat windows depend on the vessel, the existing paint and the data sheet of the batch. Share your project and we will confirm them with you. If the vessel already carries paint, tell us the make and condition, because an old coat can limit which new coats are safe to apply over it. For a deeper explanation read our marine coating system guide.
What to Check Before You Buy Marine Paint
Marine paint is bought once and judged for years. These six points separate a quote you can trust from a price that hides problems.
Substrate and Surface Preparation
Marine paint only performs as well as the steel under it. Ask which blasting grade and cleanliness the system assumes, and compare it with what your yard can deliver. Our guide to marine paint surface preparation covers Sa 2.5 blasting.
Exposure Zone
Underwater hull, boot-top, topsides, deck and tanks each see different stress. Immersion, abrasion, sun and chemicals call for different coats, so a supplier should ask where the paint will sit.
Dry Film Thickness and Coverage
Every Bajak marine product lists a recommended dry film thickness. Coverage per litre follows from that figure, which is why a price per litre alone says little about the cost of covering an area.
Compatibility Between Coats
Primer, epoxy, antifouling and topcoat must work together and be applied inside their recoat windows. Read our marine paint compatibility guide before mixing brands.
Application Conditions
Temperature, humidity and dew point decide when you can paint. Epoxy mastic, for example, is made to dry at low temperatures, while other coats need warmer steel and drier air.
Pack Size and Quantity
Most Bajak marine products ship in 20 L packs. Quantity is worked out from your area, the film thickness of each coat and an allowance for loss, and we help you calculate it.
A Marine Paint Supplier That Works From Data
Exclusive Bajak Representative
We hold the exclusive distribution agreement with Bajak Paints since 2020, so you buy the manufacturer's product, not a relabelled one.
Real Product Data
Film thickness, touch-dry time and pack size are published on each product page. When a figure is missing, we say so instead of guessing.
System Advice With the Quote
You get primer, build coat, antifouling and topcoat matched to each other, not a single product with no context.
Marine and Industrial in One Place
One supplier covers hulls, offshore steel and coastal structures, and also supplies markets in Russia, Turkmenistan, Turkey and Azerbaijan.

Where Our Marine Paint Is Used
Salt water, humidity, abrasion and fouling attack steel from the first day in service. Our marine paint range is used on vessels and on fixed structures along Iran's coast and in offshore work.
See Every Marine Paint in the Catalogue
Our Marine Paint category lists each Bajak marine coating with its technical data, so you can compare products before you ask for a price.
Go to Marine PaintHow to Buy Marine Paint From Stock Sanat
Four steps from first message to a confirmed order.
Send Project Details
Vessel or structure type, surface area, substrate, current paint condition and where it will operate.
Get a System Recommendation
We propose primer, build coats, antifouling and topcoat that are compatible with each other.
Receive the Quote
The quote lists products, pack sizes and quantities for your area, based on the data sheet film thickness.
Confirm and Supply
Once you approve the quote we confirm the order and arrange supply of the Bajak products.
Marine Paint Supplier in Iran: Common Questions
Who is a reliable marine paint supplier in Iran?
Which marine paint brand does Stock Sanat supply?
What types of marine paint do I need for a ship hull?
How much does marine paint cost in Iran?
Is antifouling paint the same as anticorrosive paint?
Can you supply marine paint for offshore platforms and ports?
Does marine paint need a primer?
Which topcoat goes over Bajak epoxy on a ship?
How do I request a marine paint quote?
Looking for a Marine Paint Supplier in Iran?
Contact Stock Sanat for Bajak marine coatings, system selection and a quote for your vessel, offshore or coastal project.