Bajak Polyurethane Topcoat (Bajathane)

  • Two-component polyurethane finish coat, supplied with Bajathane hardener
  • Hard, smooth protective film over primed steel
  • For industrial and marine steel structures
  • Made by Bajak, established 1987

Need this topcoat for your project? Request a quote or technical advice.

Bajak Polyurethane Topcoat (Bajathane Topcoat) is a two-component polyurethane topcoat supplied with its own hardener. It is the finishing layer of a coating system, applied over a suitable primer to protect industrial and marine steel and give it a clean, durable finish. Stock Sanat Caspian supplies it directly to your project.

Why Choose a Polyurethane Topcoat

The topcoat is the layer that faces sun, weather, washing and abrasion. This type of coating is chosen for this job because it forms a hard, smooth film that protects the coats beneath it and keeps the surface looking finished.

This product is made by Bajak, a paint manufacturer established in 1987. It is sold as a pack of base and hardener, so the two components are mixed on site just before use.

Technical Summary

Property Detail
Product Bajak Bajathane Topcoat
Resin type Polyurethane, two-component
Supplied as Topcoat base with a separate Bajathane hardener, in metal pails
Coating layer Finish (top) coat in a multi-coat system
Category Polyurethane Coatings
Manufacturer Bajak (established 1987)
Supplier Stock Sanat Caspian, exclusive Bajak representative since 2020
Colors, DFT, drying times, mixing ratio, thinner, pack sizes Confirmed in the technical data sheet; ask our team for the sheet matching your project

Where to Use a Polyurethane Topcoat

It is used as the final coat over primed steel and over epoxy undercoats. Typical uses include:

  • Industrial steel structures, tanks and equipment
  • Marine steel above the waterline, such as decks and superstructure
  • Pipes, machinery and metal fabrications that need a durable finish coat
  • Repainting projects where the final coat must stay clean and uniform

For hulls below the waterline, see our marine paint range. To understand how each layer fits together, read the marine coating system guide.

How to Apply Bajak Polyurethane Topcoat

Always follow the data sheet for your batch. The general sequence for a two-component polyurethane coating is:

  1. Prepare the surface. It must be clean, dry and free of oil, dust and loose material. The primer coat must be sound and within its recoat window.
  2. Mix the components. Stir the base, add the Bajathane hardener in the ratio given on the data sheet, and mix thoroughly.
  3. Apply the coat. Use brush, roller or spray as the data sheet allows, in an even film without runs.
  4. Let it cure. Keep the surface clean and protected until the film has dried and hardened as specified.

Safety, Storage and Shelf Life

  • Work in a well-ventilated area and avoid breathing vapors.
  • Wear gloves, safety glasses and suitable protective clothing.
  • Keep pails tightly closed and store them in a cool, dry place away from heat and flame.
  • Mix only the amount you can use within its pot life, because a mixed two-component coating cannot be stored.

Check the safety data sheet and the pail label before use.

Why Buy Polyurethane Topcoat from Stock Sanat Caspian

  • Original Bajak product: Stock Sanat Caspian has been the exclusive Bajak representative since 2020.
  • Technical consultation: our team helps you match the topcoat to your primer and surface.
  • Trusted quality: Bajak is a leading paint manufacturer, producing industrial and marine coatings since 1987.
  • Reliable supply and shipping: we deliver your order to your site.

Looking for other finish coats? Compare the Bajak Alkyd Topcoat and the Bajak Acrylic Topcoat, or browse the full product catalog. Typical epoxy base coats under a polyurethane finish include the 65% zinc rich epoxy primer, the epoxy mastic coating and the epoxy polyamide coating.

Need This Topcoat for Your Project?

Tell us the surface, the area and the primer you use. We will advise on the right system and send you a quote.

Request a Quote   Browse all products

Polyurethane Topcoat FAQ

What is a polyurethane topcoat?

It is the final protective layer of a coating system. It is applied over the primer or undercoat to protect it and finish the surface.

Is Bajak Bajathane Topcoat one-component or two-component?

It is two-component. The topcoat base is supplied with a separate Bajathane hardener that you mix before application.

Do I need a primer before the topcoat?

Yes. It is applied over a suitable primer or undercoat on a clean, dry surface.

Can I use it on marine steel?

It is used as a finish coat on marine and industrial steel above the waterline. Ask us to confirm the right system for your vessel.

Where can I get the data sheet and a quote?

Contact Stock Sanat Caspian through the contact page. Our team will send the technical data and a price for your project.

Reviews

There are no reviews yet.

Be the first to review “Bajak Polyurethane Topcoat (Bajathane)”

Your email address will not be published. Required fields are marked *

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.