Bajak 400°C Heat Resistant Paint
- Withstands 400°C continuously and up to 450°C for short periods
- Zinc and aluminium pigments for corrosion and chemical resistance
- Use as a primer, intermediate coat or topcoat
- 40-micron standard DFT; touch-dry in 2 hours at 20°C
Need this heat resistant paint for your project? Request a quote or technical advice.
Bajak 400°C heat resistant paint is an aluminium-pigmented industrial coating that protects steel against high temperature and corrosion. It withstands 400°C continuously and up to 450°C for short periods, and it works as a primer, an intermediate coat or a topcoat on pipes, exhausts, flues and heaters.
What Is Bajak 400°C Heat Resistant Paint?
This heat resistant paint is a multi-purpose coating from Bajak. Its zinc and aluminium pigments give strong thermal and chemical resistance, so the surface stays protected under intense heat and corrosive conditions.
You can use the same product as a primer, an intermediate coat and a finish coat. It is compatible with a wide range of metals and industrial surfaces.
It is produced by Bajak and supplied by Stock Sanat Caspian, the exclusive Bajak representative since 2020.
Key Features of Bajak Heat Resistant Paint
- High heat resistance: up to 400°C continuously and up to 450°C for short periods.
- Corrosion protection: zinc and aluminium pigments resist corrosion and harsh environments.
- Multi-purpose: use it as a primer, an intermediate coat or a topcoat.
- Wide compatibility: suits many metals and industrial surfaces.
- Aluminium-effect finish: a uniform, professional look on equipment.
Heat Resistant Paint Technical Specifications
| Property | Details |
|---|---|
| Brand | Bajak |
| Product type | Aluminium (zinc and aluminium pigmented) heat resistant paint |
| Maximum service temperature | 400°C continuous; up to 450°C short term |
| Use in the system | Primer, intermediate coat or topcoat |
| Suitable surfaces | Metals and industrial surfaces |
| Appearance | Matte |
| Colour | RAL 9006 |
| Standard dry film thickness (DFT) | 40 microns |
| Touch-dry time | 2 hours at 20°C |
| Minimum recoat interval | 4 hours at 20°C |
| Application | Brush or spray |
| Pack size | 20 litres |
| Category | Alkyd paints |
Resin type, mixing ratio, thinner and theoretical coverage are not stated for this product. Contact our technical team for the data sheet and advice for your system.
Where to Use Bajak Heat Resistant Paint
Use this heat resistant paint wherever steel sees high temperature and corrosion together:
- Pipes, exhausts, flues and chimneys
- Heaters and other thermal equipment
- Engine parts and components
- Equipment in chemical production plants
- Industrial surfaces that reach up to 400°C
Pair it with a suitable base coat such as the Bajak Alkyd Primer, or compare other epoxy coatings for non-heated areas. For ordinary-temperature steel that needs a glossy finish, see the alkyd topcoat.
How to Apply Heat Resistant Paint: Step by Step
- Prepare the surface. Remove grease, rust and dust until the metal is clean and dry.
- Stir the paint. Mix the can well until the pigment is uniform. Check the data sheet before thinning.
- Apply the coat. Use a brush or a spray gun to build an even film of about 40 microns dry.
- Let it dry. The film is touch-dry in 2 hours at 20°C. Wait at least 4 hours before the next coat.
Safety, Storage and Shelf Life
- Read the safety guide on the pack before use.
- Paint only in well-ventilated areas to avoid breathing vapours.
- Avoid direct contact with skin and eyes.
- If paint touches skin, wash at once with soap and water.
- Store closed cans in a cool, dry place; check the label for the shelf life of your batch.
Why Buy Heat Resistant Paint from Stock Sanat Caspian
- Genuine Bajak products: we are the exclusive Bajak representative since 2020.
- Technical consultation: our team helps you choose the right coating system.
- Trusted quality: Bajak is a leading industrial paint manufacturer.
- Reliable supply and shipping: we deliver your order to your site.
Need Heat Resistant Paint for Your Project?
Tell us the surface, the temperature and the area. We will advise on the right system and send you a quote.
Heat Resistant Paint FAQ
What is Bajak 400°C heat resistant paint used for?
It protects pipes, exhausts, flues, heaters and engine parts against high temperature and corrosion.
What temperature does it withstand?
It withstands 400°C continuously and up to 450°C for short periods.
Can it be used as a primer and a topcoat?
Yes. It can be used as a primer, an intermediate coat or a topcoat.
What dry film thickness should I apply?
The standard dry film thickness is 40 microns.
How fast does it dry and when can I recoat?
It is touch-dry in 2 hours at 20°C, and the minimum recoat interval is 4 hours at 20°C.
How can I apply it?
Apply it by brush or spray gun on a clean, dry, rust-free surface.
Which colour and pack size are available?
RAL 9006 in a 20-litre pack.
| Maximum temperature | 400°C continuous (450°C short term) |
|---|---|
| Appearance | Matte |
| Standard thickness | 40 micron |
| Touch-dry time | 2h (20°C) |
| Minimum recoat interval | 4h (20°C) |
| Colour | RAL 9006 |
| Pack size | 20 litres |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Reviews
There are no reviews yet.