Antifouling Paint Price: What Drives the Cost per Hull and How to Estimate Quantity
You ask three suppliers for an antifouling paint price and get three very different numbers. One quotes per liter, one per drum, one for the whole hull. None of them says how many liters the job really needs.
This guide explains what drives the antifouling paint price for a ship hull, how to estimate the quantity yourself, and what to prepare before you ask for a quote. It is written for shipowners, superintendents and dry-dock contractors. We do not publish made-up prices. We show you how to build a reliable estimate and where to get a real offer.
What Makes Up the Antifouling Paint Price?
The antifouling paint price you see on a quotation is rarely just the paint. Think of it as four layers of cost, and ask the supplier to separate them.
- Cost per liter of paint. This depends on the paint type, the biocide system and the volume solids.
- Quantity. Hull area, film thickness, number of coats and paint loss decide how many liters you buy.
- Surface preparation and application. Blasting, washing, primer, tie coat and labour often cost more than the antifouling itself.
- Logistics and dock time. Freight, packaging, thinner and the days the ship spends in dock add to the real bill.
A low price per liter can still give a high cost per hull if the paint has low volume solids or the film must be thick. Always compare cost per square meter of finished film, not cost per drum. For a wider view of marine coating cost, see our guide to marine paint cost per liter.

Antifouling Paint Price by Type: SPC, Ablative and Hard
The type of coating changes both the price and the service life. Here is how the three common families compare. This is general guidance. The data sheet of the product you choose is always the final word.
| Type | How it works | What it means for cost |
|---|---|---|
| SPC (self-polishing copolymer) | The film erodes slowly in moving water and releases biocide at a steady rate. | Usually the higher paint price per liter, but suited to long dry-dock intervals and active ships. |
| Ablative / controlled depletion | The film wears away gradually and exposes fresh biocide. | Mid-range paint price. Good for medium intervals and moderate activity. |
| Hard / contact leaching | Biocide leaches out of a hard matrix. The film does not polish. | Often the lower paint price, but a shorter life and more build-up at repaint. |
Each type suits a different trade pattern. A ship that sits at anchor for weeks needs a different film than one that sails at speed every day. Our guide on how antifouling paint works and how to choose one explains the selection in more detail.
Do not choose by antifouling paint price alone. A cheaper hard film that needs recoating earlier can cost more per year than a better film that lasts a full dock cycle.
Seven Factors That Push the Antifouling Paint Price Up or Down
1. Biocide system and content
Copper-based biocides, often with a booster, drive a large part of the antifouling paint price. Higher biocide content and more advanced systems cost more to make. Organotin (TBT) paints are banned under the IMO anti-fouling convention, so modern paints are tin-free. You can read the rules on the IMO anti-fouling systems page.
2. Binder technology
SPC binders are more complex than hard matrices, and that shows up in the antifouling paint price. The binder also sets the polishing rate and the service life.
3. Volume solids
Volume solids is the share of the wet paint that stays on the hull as dry film. A paint with 55% volume solids covers more area per liter than one with 40%. It can look expensive per liter and still be cheaper per square meter.
4. Dry film thickness and number of coats
The data sheet states a dry film thickness per coat and often a minimum number of coats. Two coats use roughly twice the paint of one. A heavier spec for a long dock interval raises the antifouling paint price but also the service life.
5. Hull area and hull zones
A bigger wetted surface needs more paint. Different zones can also use different products: flat bottom, vertical sides, boot-top and the area near the waterline. Each zone may have its own wear rate and its own specification.
6. Surface preparation and primer system
Antifouling only works over a sound, compatible system. Blasting grade, anticorrosive primer and tie coat all add cost. Our guide on antifouling vs anticorrosive paint shows what each layer does.
7. Order size, packaging and delivery
Larger orders, standard drum sizes and planned delivery usually give a better antifouling paint price than urgent small lots. Delivery to a port or shipyard and the timing against your docking date also matter.
How to Estimate How Much Antifouling Paint You Need
Knowing the quantity is the quickest way to judge any antifouling paint price. The method has four steps.
- Find the wetted surface area from the docking plan or shell expansion drawing. For a rough check, naval architects use formulas such as Denny-Mumford: area is about 1.7 x length x draft plus displacement volume divided by draft.
- Take the dry film thickness (DFT) per coat and the number of coats from the product data sheet.
- Take the volume solids (VS) from the same data sheet.
- Add a loss factor for spray loss, surface roughness, wind and leftover paint in cans and lines.
The formula is simple. The theoretical spreading rate in square meters per liter is VS percent times 10, divided by DFT in microns. The practical rate is that figure reduced by the loss factor. Liters needed equal area divided by the practical rate, times the number of coats.
Worked example (illustrative numbers only)
These numbers are an example for learning. They are not the data of any product. Replace them with values from your own data sheet.
| Item | Example value |
|---|---|
| Wetted area | 3,000 m2 |
| Dry film thickness per coat | 100 microns |
| Volume solids | 50% |
| Theoretical spreading rate | 50 x 10 / 100 = 5 m2 per liter |
| Loss factor | 30% |
| Practical spreading rate | 5 x 0.7 = 3.5 m2 per liter |
| Paint per coat | 3,000 / 3.5 = about 857 liters |
| Two coats | about 1,714 liters |
Now multiply the liters by the quoted unit price and you get a transparent antifouling paint price for the hull. If a supplier gives a total that does not match this logic, ask them to show their coverage assumptions.

Need a real antifouling paint price for your hull?
Send us your vessel, wetted area and docking date. We will suggest a tin-free Bajak antifouling system, estimate the quantity and send the technical data sheets with your quotation.
Hull Antifouling Coverage: Why Real Jobs Use More Paint
Hull antifouling coverage on paper is never the same as coverage on the hull. A new, smooth hull loses less paint. An old hull with pits, weld seams and a rough previous coat soaks up more. The loss factor in the example is a planning figure. Your yard and the paint maker can advise on a realistic one.
- Surface roughness: rough steel needs more paint to build the same film.
- Application method: airless spray loses less than roller or brush, but overspray still happens in wind.
- Geometry: bilge keels, sea chests, rudder and propeller areas add area and difficulty.
- Thinning and cleaning: thinner and line flushing consume some paint.
- Film control: thicker film than specified wastes paint and can hurt performance.
Check the film during application with a wet film gauge. It helps you stay near the specified DFT and avoids both shortages and waste.
Ship Antifouling Paint Cost: Typical Add-Ons to Budget
When owners ask about ship antifouling paint cost, they often mean only the paint. A real budget has more lines. Use this list when you compare offers.
- Paint for the full system: primer, tie coat and antifouling, in the right quantities.
- Thinner and cleaning solvent for the chosen application method.
- Surface preparation: washing, blasting and spot repairs.
- Dock rent, staging and labour hours per day.
- Technical support, data sheets and, if needed, a coating inspector.
- A small reserve for touch-ups after launch. Remember that paint made for one coat system may not suit another, so check compatibility first.
Read more about the full repair sequence in our dry dock coatings checklist. To see how often hull repainting is planned, read how often a ship hull should be repainted.
What to Prepare Before You Ask for an Antifouling Paint Price
A clear request gets a clear offer. Send these details with your inquiry and you will usually get a faster and more accurate antifouling paint price.
- Vessel type, length, beam and draft, or the wetted surface area if you have it.
- Planned docking date and the dock location.
- Condition of the current coating and the type of antifouling now on the hull.
- Trading pattern: speed, idle time and the waters where the ship works.
- Desired dock interval, for example 30 or 60 months.
- Delivery port and any packaging limits.
With this information a supplier can propose a suitable system, give a quantity estimate and attach the technical data sheets. Be careful with any quote that gives a price without asking about the hull.
Get a Real Antifouling Paint Price for Your Hull
Stock Sanat Caspian is the exclusive Bajak representative since 2020. Tell us your vessel, hull area and docking date. We will propose a tin-free antifouling system and send the technical data sheets with your quotation.
- See Bajak antifouling paint and request a quote
- Browse all marine paints
- Contact us with your hull details
We do not publish a numeric price list online, because the real figure depends on the quantity, the system and the delivery. We also do not have a published numeric data set for every product. Exact film thickness and coverage will be confirmed from the data sheet before you order.
Frequently Asked Questions
What affects the antifouling paint price the most?
The paint type, biocide system and volume solids set the price per liter. Hull area, film thickness, the number of coats and paint loss set the quantity. Surface preparation, primer, dock time and delivery add to the final cost, so compare the cost per hull, not per drum.
How much antifouling paint do I need for a hull?
Divide the wetted area by the practical spreading rate, then multiply by the number of coats. The theoretical rate is volume solids percent times 10 divided by dry film thickness in microns. Reduce it by a loss factor. Always take the values from the data sheet.
What is the antifouling paint cost per square meter?
It is the paint price per liter divided by the practical spreading rate in square meters per liter, multiplied by the coats. Because volume solids and film thickness differ between products, cost per square meter is a fairer way to compare offers than the price of a drum.
Why do two suppliers give different antifouling paint prices?
They may quote different paint types, film thicknesses, coat counts or loss assumptions. One may include primer and delivery, and another may not. Ask each supplier to state coverage, number of coats, volume solids and what the offer includes before you compare totals.
How is the wetted surface area of a ship hull found?
The best source is the docking plan or the shell expansion drawing. For a rough early check, designers use formulas such as Denny-Mumford, which uses length, draft and displacement volume. Treat the result as an estimate and confirm it with drawings before you order paint.
Can I get an exact antifouling paint price online?
Not reliably. The real figure depends on the product, the quantity, the number of coats and where the paint is delivered. Send your vessel details, hull area and docking date to a supplier and ask for a written quotation with the technical data sheets.