Bajak Epoxy Polyamide Coating
- Two-component epoxy polyamide coating for marine and industrial steel
- Resists seawater, engine oil, fuel and chemicals
- Glossy finish, 100 micron recommended dry film thickness (DFT)
- Primer, intermediate or top layer in Bajak epoxy systems
- Touch-dry in 6-8 hours at 20 °C; 20 L pack
Need a price or a system recommendation? Request a quote or technical advice from our team.
What Is Bajak Epoxy Polyamide Coating?
Bajak Epoxy Polyamide Coating is a two-component industrial paint based on epoxy resin that protects steel from corrosion. It resists seawater, engine oil, fuel and chemicals, so it suits marine and industrial structures exposed to moderate or severe corrosion.
It fits easily into the wider Bajak marine paint range and can be used as a primer, intermediate or finishing layer.
Technical Specifications of Bajak Epoxy Polyamide Coating
| Product | Bajak Epoxy Polyamide Coating |
|---|---|
| Resin type | Two-component epoxy (polyamide-cured) |
| Typical use | Primer, intermediate or top layer in Bajak epoxy systems |
| Suitable surfaces | Prepared steel and metal surfaces in marine and industrial environments |
| Finish | Glossy |
| Colours | Beige, Black, Blue, Brown, Yellow |
| Recommended DFT | 100 micron |
| Theoretical coverage | 6.1 m2 per litre at 100 micron |
| Touch-dry time | 6-8 hours at 20 °C |
| Application method | Brush, roller or spray |
| Pack size | 20 litres |
| Mixing ratio, thinner, recoat interval | See the label or contact us for the data sheet |
Figures are given at 20 °C. For mixing ratio, thinner and recoat interval, contact our team and we will send the matching data sheet.
Where to Use This Epoxy Polyamide Coating
- Primer and intermediate layer: as a primer in zinc silicate systems and as an intermediate coat over Bajak 65% Zinc-Rich Epoxy.
- Fuel tanks and vessel interiors: keeps steel away from fuel and corrosive liquids.
- Marine structures: jetties, bridges and other steelwork exposed to seawater and moisture.
- Industrial plants: steel exposed to oil, chemicals and other pollutants.
Surface Preparation and Application Steps
Good preparation decides how long the film lasts. Our guide to marine paint surface preparation explains the details. For wet tank and pipeline service, compare the coal tar epoxy; for hygienic interiors, the high-solid sanitary epoxy; for a high-solid system that cures at low temperatures, the epoxy mastic coating. A polyurethane topcoat can add a UV-stable finish, and hulls below the waterline need antifouling paint.
- Prepare the surface: remove rust, oil, grease and dust. The surface must be clean and dry.
- Mix: combine the two components in the ratio printed on the label and stir until uniform.
- Apply: use a brush, roller or spray to reach about 100 micron DFT per coat.
- Dry: allow it to touch-dry (6-8 hours at 20 °C) before handling, and follow the data sheet before the next coat.
Safety, Storage and Handling
- Read the instructions on the can label before use.
- The paint is flammable: keep it away from heat, flames and sparks.
- Avoid skin and eye contact; wear protective clothing, gloves and safety glasses.
- Work with good ventilation in enclosed spaces to avoid breathing vapours.
- Keep cans tightly closed in a cool, ventilated place. Ask us for the shelf life of your batch.
Why Buy Bajak Epoxy Polyamide Coating from Stock Sanat?
Stock Sanat Caspian has been the exclusive representative of the Bajak brand since 2020. You buy original Bajak products, not look-alikes.
- Technical consultation: our team helps you choose the right system, thickness and topcoat for your project.
- Complete systems: pair it with our Bajak Epoxy Polyamide Duct or other products in the epoxy paint category.
- Clear guidance: read our guide to marine epoxy paint for steel before you order.
Request a Quote for Bajak Epoxy Polyamide Coating
Tell us your surface, area and environment, and we will recommend the right quantity and system. Contact us for a price and technical advice.
Frequently Asked Questions
What is Bajak epoxy polyamide coating used for?
It is a two-component protective coating for steel in marine and industrial settings, including fuel tanks, vessel interiors, jetties and bridges, where corrosion is moderate to severe.
Is this epoxy polyamide coating resistant to seawater?
Yes. It is designed for harsh environments and forms a film that resists seawater, engine oil, fuel and many chemicals, helping protect steel from rust.
What dry film thickness should I apply?
The standard thickness is 100 micron DFT. At that thickness the theoretical coverage is about 6.1 m2 per litre. Always confirm the final system thickness with our technicians.
How long does it take to dry?
Touch-dry time is 6-8 hours at 20 °C. For the minimum recoat interval and full cure time, please ask us for the technical data sheet matching your conditions.
How do I apply Bajak epoxy polyamide coating?
Mix the two components in the ratio given on the label, then apply by brush, roller or spray on a clean, dry surface free of rust, oil and dust.
Can I use it as a primer or topcoat?
It can serve as a primer in zinc silicate systems, an intermediate layer in zinc-rich epoxy systems, or a finishing layer, depending on the system you specify.
Is the coating flammable and what safety gear is needed?
Yes, keep it away from heat, flames and sparks. Wear protective clothing, gloves and safety glasses, and ensure good ventilation when working in enclosed spaces.
| Color | Beige, Black, Blue, Brown, Yellow |
|---|---|
| Finish | Glossy |
| Resin Type | Two-component epoxy (polyamide-cured) |
| Recommended DFT | 100 micron |
| Theoretical Coverage | 6.1 m2/L at 100 micron |
| Touch-Dry Time | 6-8 hours at 20 C |
| Application Method | Brush, roller or spray |
| Pack Size | 20 litres |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Reviews
There are no reviews yet.