Ship in a floating dry dock at a shipyard before hull recoating
Bajak Since 1987

Iranian coating manufacturer, in marine coatings since 1992. Stock Sanat is its exclusive representative since 2020.

Marine Coatings Supply

Marine Paint Supplier in Iran

Stock Sanat supplies marine paint in Iran for ship hulls, decks, tanks, ports and offshore steel. Our range is built on Bajak, an Iranian manufacturer producing marine and protective coatings since 1992, so epoxy primers, antifouling, mastic and polyurethane topcoats come from one source.

Tell us the vessel or structure, the substrate and the exposure zone. We match them to a Bajak coating system and quote the coats you actually need, with film thickness, pack size and drying data from the product sheet.

Anticorrosive Primers
Antifouling Paint
Polyurethane Topcoats

Prefer to talk? Call 0912 042 5011

Supply Background

From the Bajak Plant to Your Shipyard

A marine paint supplier is only as dependable as the manufacturer behind it. This is the chain behind the products we sell.

1987

Bajak Paint Established

Bajak begins work on industrial and protective coating technologies in Iran.

1992

Marine Production Starts

Protective and marine coating manufacturing begins in Kaveh Industrial City.

2020

Exclusive Agreement

Stock Sanat signs the exclusive distribution agreement with Bajak Paints.

NOW

Marine Range in Stock Sanat

Epoxy, antifouling, mastic and polyurethane coatings supplied with technical advice.

Need Marine Paint for a Vessel or Project?

Send the surface, area and operating environment. Stock Sanat will propose a Bajak coating system and a quote before you commit to an order.

Choosing Marine Paint

How a Marine Paint System Is Built

Marine paint is not one product. A ship hull needs a stack of coats that bond to each other and to blasted steel. A good supplier quotes the whole stack, because a wrong topcoat or a missing primer costs more than the paint saved.

1

Primer on Prepared Steel

Zinc-rich epoxy primer goes onto blasted steel to give sacrificial corrosion protection from the first coat.

2

Epoxy Build Coats

Epoxy polyamide or epoxy mastic adds film thickness and a barrier against seawater, oil and fuel.

3

Antifouling Below the Waterline

Tin-free antifouling releases biocide gradually to keep algae and barnacles off the hull.

4

Polyurethane Finish Above Water

A polyurethane topcoat protects the epoxy and gives topsides and decks their colour and gloss.

Which Marine Paint Goes Where

ZoneUnderwater hull
Typical coating roleAntifouling over an epoxy anticorrosive system
ZoneBare steel, first coat
Typical coating roleSacrificial zinc primer
ZoneHull and deck build coats
Typical coating roleEpoxy barrier coats against seawater, oil and fuel
ZoneRepairs and cold conditions
Typical coating roleHigh-solid epoxy that dries at low temperature
ZoneTopsides, decks, superstructure
Typical coating roleColour and gloss finish over epoxy
ZoneImmersed steel and concrete
Typical coating roleHeavy-duty black protective coat

Final system, number of coats and recoat windows depend on the vessel, the existing paint and the data sheet of the batch. Share your project and we will confirm them with you. If the vessel already carries paint, tell us the make and condition, because an old coat can limit which new coats are safe to apply over it. For a deeper explanation read our marine coating system guide.

Buyer Checklist

What to Check Before You Buy Marine Paint

Marine paint is bought once and judged for years. These six points separate a quote you can trust from a price that hides problems.

1

Substrate and Surface Preparation

Marine paint only performs as well as the steel under it. Ask which blasting grade and cleanliness the system assumes, and compare it with what your yard can deliver. Our guide to marine paint surface preparation covers Sa 2.5 blasting.

2

Exposure Zone

Underwater hull, boot-top, topsides, deck and tanks each see different stress. Immersion, abrasion, sun and chemicals call for different coats, so a supplier should ask where the paint will sit.

3

Dry Film Thickness and Coverage

Every Bajak marine product lists a recommended dry film thickness. Coverage per litre follows from that figure, which is why a price per litre alone says little about the cost of covering an area.

4

Compatibility Between Coats

Primer, epoxy, antifouling and topcoat must work together and be applied inside their recoat windows. Read our marine paint compatibility guide before mixing brands.

5

Application Conditions

Temperature, humidity and dew point decide when you can paint. Epoxy mastic, for example, is made to dry at low temperatures, while other coats need warmer steel and drier air.

6

Pack Size and Quantity

Most Bajak marine products ship in 20 L packs. Quantity is worked out from your area, the film thickness of each coat and an allowance for loss, and we help you calculate it.

Why Stock Sanat

A Marine Paint Supplier That Works From Data

Exclusive Bajak Representative

We hold the exclusive distribution agreement with Bajak Paints since 2020, so you buy the manufacturer's product, not a relabelled one.

Real Product Data

Film thickness, touch-dry time and pack size are published on each product page. When a figure is missing, we say so instead of guessing.

System Advice With the Quote

You get primer, build coat, antifouling and topcoat matched to each other, not a single product with no context.

Marine and Industrial in One Place

One supplier covers hulls, offshore steel and coastal structures, and also supplies markets in Russia, Turkmenistan, Turkey and Azerbaijan.

Container cranes at a port berth beside a cargo vessel
Applications

Where Our Marine Paint Is Used

Salt water, humidity, abrasion and fouling attack steel from the first day in service. Our marine paint range is used on vessels and on fixed structures along Iran's coast and in offshore work.

Ship and Boat Hulls
Oil and Gas Platforms
Piers and Harbour Structures
Floating Docks and Marinas
Marine Transport Equipment
Coastal Steel Structures
Marine Paint Category

See Every Marine Paint in the Catalogue

Our Marine Paint category lists each Bajak marine coating with its technical data, so you can compare products before you ask for a price.

Go to Marine Paint
How to Order

How to Buy Marine Paint From Stock Sanat

Four steps from first message to a confirmed order.

01

Send Project Details

Vessel or structure type, surface area, substrate, current paint condition and where it will operate.

02

Get a System Recommendation

We propose primer, build coats, antifouling and topcoat that are compatible with each other.

03

Receive the Quote

The quote lists products, pack sizes and quantities for your area, based on the data sheet film thickness.

04

Confirm and Supply

Once you approve the quote we confirm the order and arrange supply of the Bajak products.

FAQ

Marine Paint Supplier in Iran: Common Questions

Who is a reliable marine paint supplier in Iran?
Look for a supplier that sells a manufacturer's own product, publishes technical data and recommends a full coating system. Stock Sanat is the exclusive representative of Bajak Paints, an Iranian marine and protective coating manufacturer, and we quote complete systems rather than single cans.
Which marine paint brand does Stock Sanat supply?
We supply Bajak marine coatings: epoxy polyamide, zinc-rich epoxy primer, epoxy mastic, coal tar epoxy, tin-free antifouling paint and polyurethane topcoat.
What types of marine paint do I need for a ship hull?
A typical steel hull uses an anticorrosive primer, epoxy build coats, antifouling below the waterline and a polyurethane finish above it. The exact stack depends on the vessel, the existing paint and the docking cycle.
How much does marine paint cost in Iran?
The price depends on the product, pack size (most Bajak marine products come in 20 L packs), quantity and market conditions. Send your area and system and we will quote it. Our marine paint cost guide explains what moves the price.
Is antifouling paint the same as anticorrosive paint?
No. Anticorrosive paint protects steel from rust, while antifouling paint stops algae and barnacles from growing on the hull. Antifouling is applied over a compatible anticorrosive system.
Can you supply marine paint for offshore platforms and ports?
Yes. Bajak antifouling and epoxy coatings are used on oil and gas platforms, piers, floating docks, marinas and other harbour structures. Send the structure details for a recommendation.
Does marine paint need a primer?
Yes. Bare steel needs an anticorrosive primer, such as a zinc-rich epoxy, before build coats and antifouling go on. The primer bonds to blasted steel and protects it if the film is later damaged.
Which topcoat goes over Bajak epoxy on a ship?
A polyurethane topcoat such as Bajak Polyurethane Topcoat (Bajathane) is the usual choice above the waterline because it keeps colour and gloss in sunlight. Confirm recoat timing with the data sheet and with us.
How do I request a marine paint quote?
Use our contact page or call 0912 042 5011. Include the vessel or structure, area to coat, substrate and operating environment.
Painted steel ship hull plating in black and white coating
Need More Information?Contact Stock Sanat for marine paint selection and technical guidance.

Looking for a Marine Paint Supplier in Iran?

Contact Stock Sanat for Bajak marine coatings, system selection and a quote for your vessel, offshore or coastal project.